Selection Guides--Jereh Compression Equipment Co., Ltd.

HomeSelection Guides

The natural gas compression unit is designed in accordance with the user’s specific application. The following data and requirements must be provided to ensure correct selection of configuration.

HSR Compressor Sizing Data Sheet
Instructions	In order to ensure your selection is successful, the blanks marked with * must be filled in, thanks.		Project Name
	Design point is Required to be filled in.		Project location
	Make sure to Select proper units		Request date
				Alternate conditions
	Choice	Units	Design Point	Case 1	case 2
Site Elevation	Meters or Feet above sea level	Meters ASL	*
Site minimum Ambient Temperature	°F or °C	°C	*
Site Maximum Ambient Temperature	°F or °C	°C	*

Gas Flow Capacity requested Each Compressor	MMSCFD, Nm^3/hr, Sm^3/hr., Kg/hr, Lb/hr	Sm³/Hr	*	*	*
Quantity of Compressors Desired
Total Flow Required	MMSCFD,Nm^3/hr, Sm^3/hr., Kg/hr, Lb/hr	Sm³/Hr
Suction temperature	°F or °C	°C	*	*	*
Suction Inlet Pressure (Gage)	PSIG, Barg, Kg.Cm^2, Etc…	MpaG	*	*	*
Final Discharge pressure ( Gage)	PSIG, Barg, Kg.Cm^2, Etc…	MpaG	*	*	*
For electric motors, specify Frequency ( Hz)	50Hz or 60 Hz	Hz	*	*	*
Engine/Motor compressor Speed Preference	As applicable	RPM	*

Provide gas analysis @ suction conditions ( Most accurate)	Gas Composition		Mole Wt %	Mole %	Mole %
	water	H₂O
	Carbon Dioxide	CO₂
	Nitrogen	N₂
	Methane	CH₄
	Ethane	C₂H₆
	Propane	C₃H₈
	IsoButane	C₄H₁₀
	n-Butane	C₄H₁₀
	ISOPentane	C₅H₁₂
	n-Pentane	C₅H₁₂
	n-Hexane	C₆H₁₂
	n-Heptane	C₇H₁₆
	n-Octane	C₈H₁₈
	n-Nonane	C₉H₂₀
	n-Decane	C₁₀H₂₂
	Hydrogen Sulfide	H₂S
	Neopentane	C₅H₁₂
	Hydrogen	H₂
	Oxygen	O₂
	Air
	Other


Company Name:	*
Address:	*
Phone:	*
Contact:	*
E-mail:	*
Other comments:	*